双组份打胶机知液灌胶机的清洗办法

发布时间:2019/01/30    发布人:

双组份打胶机知液灌胶机的清洗办法
Cleaning method of two-component glue beater knowledgeable liquid filling machine
在电子░,LED光电░,五金░,塑胶等行业░,双液灌胶机被越来越多的客户所运用!
In electronics, LED photoelectricity, hardware, plastic and other industries, double liquid glue machine is used by more and more customers!
很多客户在初次运用后░,都有问到灌胶机的清洗成绩。不晓得怎样去清洗░,在这里我们就做一下复杂的解说。假如是带自动清洗的灌胶机░,那操作起来就相当复杂了░,只需按一下操作面板上的清洗按钮░,机器就会自动的去完成。假如机器不带自动清洗功用░,那麼普通如何去清洗呢?
Many customers have asked about the cleaning results of the glue filling machine after their first use. I don't know how to clean it. Here we will give a complicated explanation. If it's a glue filling machine with automatic cleaning, it's quite complicated to operate. Just press the cleaning button on the operation panel, and the machine will finish automatically. If the machine does not have the function of automatic cleaning, how do you usually clean it?
第一░,看胶水的性质。假如单液的胶水░,而且在常温不是很容易固化的胶水░,那麼每次点完或许灌完产品后░,下次所用到的胶水还是相反时░,可以不思索清洗成绩。假如是厌氧胶•●、快干胶相似于401░,502这样的胶水或许相似硅胶之类的常温下会比拟快固化的胶水░,那麼是要清洗的。清洗的时分░,先将没用完的胶水排完░,然后将无机溶剂░,如天那水•●、工业酒精░,放到机器外面。然后将这些无机溶剂和胶水一同压出来░,再用气枪吹开即可。
First, look at the nature of glue. If a single solution of glue is not easy to solidify at room temperature, then after each order or filling of the product, the next time the glue used is the opposite, you can not think about the cleaning results. If anaerobic and quick-drying glue are similar to 401,502 or silica gel, they will be similar to fast-curing glue at room temperature, then they should be cleaned. When cleaning, the unused glue is discharged first, and then inorganic solvents, such as Tianna water and industrial alcohol, are put outside the machine. Then these inorganic solvents and glue are pressed out together and blown away with an air gun.

双组份打胶机
用此类型的机器░,清洗是非常必要的░,否则的话░,胶水固化在胶阀中░,或许是料桶中就很费事░,能够有些配件就要改换了。所以每次用完后░,一定要记得清洗!双液灌胶机A B胶混合局部只要出胶口的搅拌管░,所以清洗局部只要搅拌管░,其他局部都不必清洗;
With this type of machine, cleaning is very necessary, otherwise, the glue solidified in the rubber valve, perhaps in the barrel is very troublesome, can some accessories will be changed. Therefore, after each use, we must remember to clean! The mixing part of double-liquid glue filling machine A-B glue only needs the mixing pipe of the outlet, so the cleaning part only needs the mixing pipe, and the other parts need not be cleaned;
假如是双组份胶水的双液灌胶机░,那麼清洗就比拟复杂了░,任务完成后将灌胶机后面的白色混合管拆上去放到无机溶剂外面浸泡一下即可░,或许换一根混合管。
If it is a two-component glue filling machine, then the cleaning is more complicated. After the task is completed, remove the white mixing pipe behind the glue filling machine and put it outside the inorganic solvent for soaking. Maybe replace it with a mixing pipe.
综上所述有济南昌盛机械提供░,更多双组份打胶机知识░,欢迎关注我们的网站:谢谢支持!
In summary, all the above-mentioned Jinan Changsheng Machinery provides more knowledge of two-component glue machine. Welcome to our website: . Thank you for your support!

www.kecimusic.com
友情链接:49彩票  博美彩票  3号彩票  39彩票  彩票77  四柱彩票  彩29彩票  彩87彩票  128彩票  YY彩票  彩都会彩票  优乐彩  亦博彩票  七七彩票  金六福彩票  大奖网彩票  豪客彩  EG彩票  金福彩票  同乐彩