How to deal with the wear condition of hollow glass gluer
There is no way to classify such kind of wear and tear. It can be summarized from the whole point of view. For example, it can show a series of wear and tear, such as the wear of glue and abrasion. The other is based on the principle of friction. It can be divided into adhesion wear, fatigue wear and corrosion wear.
If it is the adhesive wear of hollow glass gluer, then such a form, they themselves are shown under the action of cutting force in the process of the whole consumption line task. Some different adsorptive films on the whole friction surface will be destroyed at different levels more or less, so that the outline of their appearance will be a series of cold under the interaction. Welding, because of absolute motion, such a form itself will make the data move from one end to the other, and it will constitute a wear and tear, but in such a process, sometimes the data will adhere to the original appearance, in this case will present a reversal of the transfer of the scene, perhaps that the entire appearance will become a free particle, load. The bigger the temperature, the higher the appearance, and the more serious their abstraction is. Generally speaking, this kind of wear will have a certain impact on the motion bite. The whole movement is often a form of expression between wear and tear. In order to aggravate the original wear, the following measures can be taken. For example, we can choose some different materials reasonably. For some materials of metals, they are more and more easy to adhere, and the latest inion is absolutely in the shape of the material, he has a super anti-adhesion ability, they can use these different data to stop the disposal of appearance, in the process of practical disposal, they can also be electronically or sprayed to stop one-sided disposal, in addition to this. In addition, they can also stop the temperature control of the appearance of all frictional performance, use different smoothing agents to stop adding, and have super control pressure.
If some fatigue wear occurs on the surface of the hollow glass beater, then under the condition that the whole strain can be contacted, there will often be some other wear strength, and there will be a certain depth on the surface of the friction, and it has fatigue cracks. With the joining of the whole cracks, metal particles tend to fall off from the beginning of the surface. In order to improve the fatigue life of the exterior, it is necessary to apply it reasonably.
The above content is provided by Jinan Changsheng Machinery. To learn more about the two-component glue machine, you can pay attention to our website: , thank you!