In the process of daily use, we should pay attention to the maintenance of gluing machine.
1. Head sealing ring should be changed once in 7-10 days.
2. When changing, all parts should be cleaned and cleaned, and there should be no residue of raw materials.
3. Take off the durable mixing pipe and the steel hook before going to work everyday, and clean the nose. Butter is drilled in the hole position of B material hole and hook, and B material hole is sealed to avoid solidification of B material. The mixing pipe should also be cleaned to ensure that the static rubber valve A/B outlet has no residual glue. Clean fuselage exterior to ensure machine cleaning.
4. Install the steel hook slowly before starting the machine. Sand paper is used to polish the top of the new steel hook to make it smooth and lubricated. To be installed in place, check whether the motor of the machine head can work properly and whether the discharging cylinder can work properly.
5. Before normal consumption, remember to discharge a small amount of rubber, because there can be butter residue outside, discharge to avoid affecting the quality of production.
6. Air source filters and Y-type Downhose filters are required to be cleared once a month. Reflect on the looseness and smoothness of all movements. If the long-time machine is out of use, the glue of all barrels and pipes outside the machine is cleared. Cleaning fluids for all pipes should also be cleared.
For more inion about the two-component glue machine, please pay attention to our website of Changsheng Machinery in Jinan: , thank you!