Two-component gluer informs you of several factors affecting the quality of insulating glass
We know that hollow glass has become more and more widely used recently, and the automatic gluing machine for hollow glass has gradually been well known. Hollow glass has been used in all walks of life.
First of all, we need to understand the history of hollow glass manufacturing, his manufacturing process is full of frustrations. Experienced the first two glasses, simple two glasses, to the later manual one-way seal, two-way seal and in recent years gradually popular composite tape hollow glass and so on. From the creation of Americans in 1865 to today, hollow glass has been developed for more than 100 years. After more than 40 years of development in China, the hollow glass market is tending to fluctuate and mature. With the increasing efforts of energy saving and emission reduction in China, hollow glass has become the favorite of builders. But there is still one achievement that can not be ignored, that is, the quality of hollow glass.
Several factors affecting hollow glass are as follows:
Selection of glass
1. The requirement of glass sheet for manufacturing hollow glass is very complex, and the transparency and strength should meet the requirement. Many of them can be used as colorless float glass, coated glass, toughened glass, laminated glass and so on. These are all possible. You can go there only after passing the test. But remember to prevent the use of ordinary flat glass, because the transparency and strength of flat glass can not reach the specification of hollow glass.
Application of drying agent
The effect of drying agent should be noted. At present, there are three types of drying agent:
1. It has a good adsorption effect on volatile substances.
2. The adsorption of inert gases at both ends is the lowest.
3. Ordinary zeolite users can choose and remember that the environment of using zeolite should be dull. Fillers should be used within one and a half hours to ensure the quality of hollow glass at the maximum level. Seal link
Sealing is a very important link, hollow glass in the process of consumption will be divided into two parts. First seal and front double seal.
This link has basically achieved mechanized consumption, and the self-sealing link of the hollow glass automatic gluing machine has played a very good role. The quality of sealing indirectly affects the quality of insulating glass. So we should pay more attention to this step.
This article is organized by Jinan Changsheng Machinery . We will provide you with more knowledge of two-component gluing machine. Interested friends can pay attention to us. Thank you!