1, when mixing glue or punching gun (Flushing glue mixing machine and rubber nozzle), we must walk the machine head to the end of the track, and use the adhesive plate to catch the glue released from the rubber nozzle, so as not to contaminate the equipment.
2, when the operation parameter is set, it is carried out on the PC display box of the control box. According to the requirement, the setting value is selected, and it is not set at will, so that the controller can send out the wrong inion, affect the quality of glue or damage the equipment.
3, when mixing or flushing the gun, we must first open the glue nozzle to control the valve, and then open the machine, so as to avoid the damage to the equipment or the safety accident.
4, when the glue is played, the glass must be helped to avoid the glass out of the position and influence the quality of the glue.
5, when firing, first close the B glue discharge valve on the machine head, close the B glue pump, then open the B glue reflux valve, and finally flush the gun, rinse to the gel outlet without black glue, and rinse it to finish.
6. machine head motor under no foreign objects, away from the motor to avoid danger.
7. a glass switch in front of the head can not have a glue in the light eye, otherwise the work will be mistaken.
8. the rubber mouth and both sides of the scraper, such as glue, should be cleaned up.
There is no lime powder on 9. suction cups. If you have glue, please clean it. If some glass edges are just in the center of the suction cup, you can adjust the sucker to move around.
10. hit three glass to the aluminum frame detection probe off off, when the installation of double glass.
The company serves the customer in all directions, with the high quality, the reasonable price and the perfect after sale service and the customers to advance hand in hand, and develop together. Quality assurance, welcome to consult the negotiation.