检测双组份打胶机密封圈单向阀的方法

发布时间:2017/11/21    发布人:

  1•●、检测双组份打胶机的供胶管路是否通畅░,混交棒是否完好。因为我们使用胶体的特质决定的供胶管路非常容易杜塞░,如果对方平时没有注意对设备保养那么有很大的可能会堵塞•●、混交棒损坏░,如果这部分损坏的话设备的出胶量会变得不正常甚至会出现花胶的情况出现。

  1. Test whether the glue supply pipeline of double component glue machine is unobstructed and whether the mixed rod is intact. Because we use the glue line colloid characteristics determine very easily Dusseldorf, if you usually do not pay attention to equipment maintenance so great may be blocked and mixed rod damage, if this part of any equipment to produce the adhesive will become normal or even a flower gum situation.

  2•●、打胶机的供娇压力如果不够的话也是会出现这个问题的░,因为打胶机的胶体完全靠气压来挤出设备并完美的涂装在中空玻璃的铝条中的。如果压力过小的话也会导致中空玻璃打胶机密封不严。所以我们一定要检测下我们要购买的双组份打胶机的压力系统是否正常░,是否能够正常的调节压力。

  2, if the pressure of the glue machine is not enough, it will also appear this problem, because the glue of the glue machine is completely squeezed by the air pressure equipment, and perfectly painted in the aluminum strip of the insulating glass. If the pressure is too small, it will lead to the sealing of glass sealing machine is not strict. So we must check whether we need to buy the pressure system of two sets of glue machine is normal, whether it can regulate the pressure normally.

  3•●、排查检测双组份打胶机的密封圈以及混合器单向阀░,这部分如果损坏的话会导致双组份打胶机的aB组份比例不对░,出现混乱!同时密封圈也算是比较容易损坏的所以我们应当重点排查。

双组份打胶机多少钱

  3 •●、 check and test the sealing ring and mixer check valve of the double component rubber breaker, if this part is damaged, it will lead to the aB component proportion of the two component punch machine is not right, and there will be confusion! At the same time, the sealing ring is relatively easy to damage, so we should focus on investigation.

  双组份打胶机单向阀

  One way valve for two component rubber press

  4•●、二手双组份打胶机因其具有超高的性价比所以还是有相当大的一部分企业会选择二手双组份打胶机。二手双组份打胶机在价格上具有极大的优势░,能够为企业节约一部分资金但是同时也会有各种的风险░,这个就需要各个企业在购买二手双组份打胶机的时候擦亮眼睛了。

  4, the second-hand two component punch machine because of its high cost performance, so there are still a large number of enterprises will choose the second-hand two component rubber machine. Second hand two component glue machine has great advantages in price, can save part of the money for the enterprise, but there will also be a variety of risks, this requires each enterprise in the purchase of second-hand two-component glue machine to polish eyes.

  5•●、我们需要坚持伺服电机减速机间或减速机齿轮间键•●、伺服控制器或电机是否损坏•●、烧毁。如果这些位置损坏的话会导致我们的双组份打胶机玻璃打胶机机头不行走电机不转的故障

  5, we need to insist on servo motor reducer or reducer gear key, servo controller or motor is damaged, burned. If these positions are damaged, it will lead to the failure of the two component glue machine glass gluing machine head not to walk and the motor does not turn

  本文由双组份打胶机为您提供░,我们的网站是:我们将以全心全意的热情为您提供更优质的服务░,欢迎您的访问!

  In this paper, a two component glue machine to provide you, our website is: , we will wholeheartedly provide you with better service, you are welcome to visit!

www.kecimusic.com
友情链接:快发彩票  凤凰彩票  天际彩票  57157彩票  亿乐彩  68彩票网  大运彩票  彩客网  e博彩票  地球人彩票  亚投彩票  平安彩票  66彩票网  800万彩票  c07彩票  彩29彩票  九度彩票  500万彩票  诺亚彩票  威尼斯人彩票