First, maintenance and maintenance
1, after a period of operation of the new machine, should be fully checked whether the fasteners are loose, and re tightened.
2, after the completion of each use, the machine to remove the residual glue and dust, so that the machine remains clean.
3. Regularly check whether the electrical wiring is loose and the reliability of grounding.
Two. Inspection and maintenance of mechanical parts of small double component rubber press:
1. clean the appearance of the spray gun and clean the nozzle to ensure the smooth flow of the nozzle;
2. cleaning or changing the filter screen of glue machine and spray gun;
3. check the spray gun whether there is glue leakage phenomenon, if there is glue leakage phenomenon, please adjust, repair, replace the spray gun, nozzle, nozzle and other parts need to be replaced.
4. check whether the inner wall of the cylinder has carbonized layer, if there is carbonized layer, please use the special cleaning solution R solvent cleaning cylinder.
5. the glue machine is heated to the operating temperature, the hot melt adhesive glue emptying. Check whether there is impurity in the rubber cylinder. If there is impurity, clean the rubber cylinder with clean cloth.
In this paper, a two component glue machine to provide you, our website is: , we will wholeheartedly provide you with better service, you are welcome to visit!