如何设定好双组份打胶机的打胶速度?

发布时间:2017/10/12    发布人:

  1•●、双组份打胶机的基本工作流程如下:

  1. The basic working process of the double component gluing machine is as follows:

  (1)首先在打胶机的控制面板设定个好打胶机的打胶速度(默认也可以)

  (1) first of all, in the control panel of the glue machine, set the glue speed of the glue machine (the default is also OK)

  (2)将玻璃放入打胶机的工作区域

  (2) put the glass into the working area of the glue machine

  (3)当设备检测到玻璃后吸盘会自动吸住玻璃以免玻璃在打胶过程中晃动或人为晃动正在进行打胶的玻璃

  (3) when the device detects the glass sucker automatically so as not to suck the glass glass glue in the process of shaking in the shaking is glue or man-made glass

  (4)当洗盘对玻璃固定好后░,打胶机的机头就开始对玻璃进行打胶动作(不需要进行对玻璃的厚度以及宽度进行设置░,打胶机会自动调整并工作)

  (4) when fixed on the glass pad, head of glue machine began to glass glue (without the need for action on the glass thickness and width setting, glue the opportunity to automatically adjust and work)

  (5)以上的步骤重复3次将玻璃的4边全部完成打胶后整个玻璃的打胶工作就算完成了。

  (5) repeat the above steps 3 times, and complete the 4 sides of the glass. After gluing, the whole glass will be finished.

  一般在默认的打胶速度每分钟至少可以完成一款2米5见方的玻璃打胶工作░,如果将打胶机的打胶速度加快生产会进一步提高。

  Generally in the default beat speed, at least every minute can complete a 2 meters, 5 square glass punch work, if the glue machine to speed up the glue, production efficiency will further improve.

双组份打胶机价格

  二•●、打胶机的特点

  Two, the characteristics of glue machine

  1•●、用高压空气在设定的时间内░,使用脚踏开关或自动把液体推出。

  1, use high pressure air in the set time, use pedal switch or automatic liquid launch.

  2•●、点胶机控制器有点滴,连动,定时滴胶功能;点滴就是直接触发脚踏开关滴胶,并且可通过时间控制点胶量精确度;连动就是用脚踏板之关闭时间多久来控制滴胶时间;定时滴胶就是触发开关通过时间控制滴胶

  2, dispensing controller with drip, linkage, timing function is directly trigger glue; drop foot switch glue, and through the dispensing time control accuracy; is used to control the closing time how long time the glue pedal linkage; timing trigger switch control is epoxy glue through time

  3•●、自动双组份打胶机采用高精度数码定时控制器,精准控制每次滴定时间,精确到毫秒░,正确地控制液料流量░,绝不会浪费液料。

  3 •●、 automatic double component glue machine adopts high precision digital timing controller, precisely control each titration time, accurate to millisecond, correctly control liquid material flow, will never waste liquid material.

  4•●、只要调节好气压░,出胶时间和选择适当的针咀░,便轻易改变每次注滴量和注滴时间。

  4, as long as the adjustment of air pressure, the time to glue and choose the appropriate needle, it will easily change the amount of each drop and drip time.

  5•●、调整自动点胶阀尾部调节螺丝和胶水的压力可控制出胶量大小。胶量调节螺丝顺时钟向下转动为减小胶量░,逆时钟方向转动为 加大胶量。

  5, adjust the automatic dispensing valve tail adjustment screw and glue pressure, can control the amount of glue. The glue volume adjusting screw is clockwise downward to reduce the glue quantity, and rotates in the counter clock direction to increase the adhesive quantity.

  本文的精彩内容来自双组份打胶机详细内容请点击我们的官方网站:/谢谢您的到来!

  The exciting content of this article comes from the two component dispenser, please click on our official website: /, thank you for coming!

www.kecimusic.com
友情链接:汇赢网  宝博彩票  凤凰彩票  手机购彩  天鸿彩票  彩客网  39彩票  777彩票  大奖网彩票  达人彩票  博冠彩票  68彩票网  好运彩票  3号彩票  丰盈彩票  开门彩  彩票777  博乐彩票  人人发彩票  YY彩票