中空玻璃双组份打胶机的最大变形量

发布时间:2017/09/28    发布人:

  中空玻璃生产线零件受载荷时会产生弹性变形。当双组份打胶机弹性变形量超过许可范围时░,零件或机器便不能正常工作。

  The parts of the insulating glass production line produce elastic deion when they are loaded. Parts or machines will not work properly when the elastic deion of the two-component punch exceeds the allowable range.

  弹性变形量过大会破坏零件间相互位置及配合关系░,有时还会引起附加动载荷及振动。对塑性材料制成的零件░,当载荷过大使零件内的应力超过了材料的屈服极限时░,零件将产生塑性变形░,塑性变形会使零件的尺寸和形状发生永久性改变░,使零件不能正常工作。

  The elastic deion can destroy the mutual position and coordination between parts, and sometimes cause additional dynamic load and vibration. The parts made of plastic material, when the load stress in the ambassador of parts exceeds the material yield limit, the parts will produce plastic deion, plastic deion makes the part size and shape of a permanent change, the parts can not work normally.

  中空玻璃打胶机░,双组份打胶机纯气动进口作为国内做常用的中空玻璃设备之一░,已经成为广大客户首选设备░,他的构造以及配件对得起他的价格░,作为中空玻璃设备░,涂胶机生产厂家来说░,分析一下是怎么构成和组成的。

双组份打胶机多少钱

  Hollow glass glue machine, two-component glue machine imported pure pneumatic as domestic one of the commonly used hollow glass equipment, has become the preferred equipment for our customers, as well as parts of his structure to live up to his price, as a manufacturer of hollow glass equipment, coating machine, analysis about how the structure and composition of the.

  1•●、中空玻璃打胶机辅以增压供料压盘░,充分保证高粘度流体的满腔输送░,基料压入并增高至高压░,固化剂压入并增压░,再送至比例泵░,固化剂的流量由调比机构调节░,二种组份同时送入混合器░,充分混合后到达挤胶枪

  1, hollow glass glue machine with pressurized feeding plate, and fully guarantee the full transport of high viscosity fluid, the base material is pressed in and increased to high pressure, pressure and curing agent into the supercharger, sent to the proportional pump, curing agent flow by adjusting mechanism for adjusting the ratio of two components at the same time, into the mixer after mixing at glue gun

  2•●、 基料泵•●、固化剂泵及比例泵均采用特殊的高压柱塞泵░,双向等量供料░,基料泵有液压系统驱动░,固化剂泵由气动马达驱动。

  2, base pump, curing agent pump and proportional pump are used special high-pressure plunger pump, two-way equal feeding, base pump has hydraulic system drive, curing agent pump driven by pneumatic motor.

  3•●、下端出口及混合器进料处均设有高压球阀░,冲胶泄压用░,混合器上设有单向针阀░,不但使混胶更加均匀░,而且防止两种组份户窜░,将通道固化堵塞。

  3, the lower end of the outlet and mixer feeding place are equipped with high pressure ball valve, glue, pressure relief, the mixer is equipped with one-way needle valve, not only to make mixing more evenly, but also to prevent the two components of households channeling, the channel curing blocked.

  气动高效中空玻璃打胶机组成:高能双组份打胶机主要有基料泵•●、固化剂泵•●、比例泵•●、基料泵升降系统•●、调比结构•●、混胶系统 •●、气动系统•●、液压系统及电气系统组成。分工明细░,高效产能。

  Pneumatic, hollow glass glue machine: high energy two-component glue machine main material pump, pump, pump, curing agent ratio of base material pump lifting system, adjusting structure, mixing system, gas system, hydraulic system and electrical system. Breakdown of labor breakdown, efficient production capacity.

  本文由双组份打胶机为您提供░,我们的网站是:/我们将以全心全意的热情为您提供更优质的服务░,欢迎您的访问!

  This article is made up of a two component press machine. Our website is: /, we will provide you with better service with your wholehearted enthusiasm, and welcome your visit!

www.kecimusic.com
友情链接:4u彩票  90彩票  百万彩票  pp彩票  彩宝贝彩票  旺旺彩票  百胜彩票  凤彩网彩票  博金冠彩票  国民彩票  彩拾彩票  吉祥彩票  国民彩票  购乐彩  uc彩票  128彩票  8888彩票  七星彩票  七匹狼彩票  威尼斯人彩票