中空玻璃打胶机清洗的方法!

发布时间:2019/09/16    发布人:

中空玻璃打胶机在经过一段时间的是要用之后░,应该对其进行清洗!双组份打胶机厂家提示大家░,打胶机的清洗非常重要░,可以避免以下情况的发生:
Hollow glass gluer after a period of time is to use, it should be cleaned! The manufacturer of two-component glue beater reminds you that the cleaning of glue beater is very important to avoid the following situations:
1•●、花胶的出现避免
1. Avoiding the appearance of gum
2•●、不出胶的问题
2. No glue problem
3•●、压力跟不上的问题
3. The problem that pressure can't keep up with
中空玻璃打胶机分为全自动双组份打胶机和半自动双组份打胶机░,两种设备的清洗方法基本是一样的。中空玻璃打胶机在使用完后░,必须进行清洗░,如果不及时清洗双组份胶就会固化在输胶管和打胶机中░,影响以后的正常使用。

双组份打胶机
Hollow glass gluing machine is divided into automatic two-component gluing machine and semi-automatic two-component gluing machine. The cleaning methods of the two equipments are basically the same. After using the hollow glass glue beater, it must be cleaned. If the two-component glue is not cleaned in time, it will be solidified in the hose and glue beater, which will affect the normal use in the future.
打胶机的清洗根据下次使用时间的间隔分为两种清洗方式░,一种是日常清洗主要是每班结束后的清洗工作。还有一种是彻底清洗░,主要是设备准备要空置░,在本次使用完至下次使用间隔时间比较长。这两种清洗的方式是不一样的。
The cleaning of glue beater can be divided into two ways according to the interval of the next use time. One is the daily cleaning mainly after the end of each shift. There is also a thorough cleaning, mainly equipment preparation to be vacant, in this use to the next use of a longer interval. The two cleaning methods are different.
一个班完成后░,关闭黑胶输送管和压力开关░,继续输出白胶░,直到放出的胶里没有一点黑颜色░,再关闭白胶压力开关░,关闭白胶输送开关░,一个班的完工后清洗就完成了。
After the completion of a shift, close the black rubber conveyor pipe and pressure switch, and continue to output white glue until there is no black color in the released glue, then close the white glue pressure switch, turn off the white glue conveyor switch, after the completion of a shift cleaning is completed.
比较长时间(15天以上)需要将设备空置:在生产任务完成后░,将压力开关和输送开关都关闭后░,将胶枪拆卸下来用煤油清洗干净░,将输送胶的管子拆卸下来░,用空压机的高压空气将管内的胶吹干净。
For a long time (more than 15 days), the equipment needs to be empty: after the production task is completed, the pressure switch and the conveying switch are closed, the rubber gun is disassembled and cleaned with kerosene, the pipe for conveying glue is disassembled, and the glue in the pipe is blown clean with the high-pressure air of the air compressor.
感谢您的阅读与观看░,本文的精彩内容来自:双组份打胶机░,我们会有更多的精彩内容继续为您呈现░,详情请点击:
Thank you for your reading and watching. The wonderful content of this article comes from: two-component glue beater. We will have more wonderful content to continue to show you. For more details, please click: .

www.kecimusic.com
友情链接:520彩票  快8彩票  鼎宝彩票  彩天下彩票  新华彩票  宝博彩票  人人发彩票  盛兴彩票  九度彩票  彩66彩票  全球彩票  葡京彩票  168彩票  361彩票  购乐彩票  87彩店  凤彩网彩票  彩83彩票  49彩票  大都会彩票