如何判断双组份打胶机的磨损情况呢?

发布时间:2019/06/14    发布人:

双组份打胶机在实际使用的过程当中会多多少少的出现一些磨损的情况░,关于这样的一类磨损完全没有办法给它们进行分类░,可以从整体的角度来讲给他们进行归纳░,比如可能对磨损有着一系列的表现░,像是胶和磨损擦伤的磨损░,另外一个就是根据摩擦的原理░,分为粘着磨损░,疲劳磨损以及腐蚀磨损等等。
There is no way to classify such kind of wear. It can be summarized from the overall point of view. For example, wear may have a series of performance, such as the wear of glue and abrasion, and the other is based on the principle of friction. For adhesion wear, fatigue wear, corrosion wear and so on.
如果是双组份打胶机出现的粘着磨损░,那么这样的一种模式░,他们本身就是在整个生产线工作的过程中切削力的作用下所表现出来的░,整个摩擦表面的一些不同的吸附膜░,会多多少少地遭到不同程度的破坏░,让他们表面的轮廓░,在相互作用之下会发生一系列的冷焊░,因为相对运动░,因此░,这样的一种模式本身就会让材料从一端走向另一端░,而且░,它会形成一种磨损░,不过在这样一个过程当中░,有的时候材料也会附着在原本的表面░,在这种情况之下会出现逆转转移的现象░,或者是说整个表面会成为一种游离的颗粒░,负载的越大░,表面的温度也是越高的░,而且他们的形象也往往是越严重的。
If the adhesive wear of the two-component glue beater occurs, then such a mode, which is itself manifested under the action of cutting force in the whole production line, will be more or less destroyed by different adsorbing films on the whole friction surface, so that their surface contours will be damaged in varying degrees, and a series of cold welding will occur under the interaction. Because of relative motion, such a mode itself will make the material move from one end to the other, and it will form a kind of wear and tear, but in such a process, sometimes the material will adhere to the original surface, in this case there will be reverse transfer phenomenon, or the whole surface will become a free particle, the load will be more. The higher the surface temperature is, the more serious their image is.
通常来讲░,这样的磨损会对运动咬符有一定的影响░,整个运动往往是在磨损之间的一种表现形式░,而且为了减轻原本的磨损░,完全可以采取如下措施░,比如░,可以合理的去选择一些不同的材料░,相对于金属的一些材料来讲░,他们更加容易粘着的░,而且新的材料相对于塑形的材料来说░,他就有着超强的抗粘着的能力░,他们都可以用这些不同的材料来进行表面性的处理░,在实际处理的过程当中░,也可以通过电动或者是喷涂的方式对他们进行全面的处理░,除此之外░,他们也可以对所有的摩擦问题的表面进行一定的温度控制░,采用一些不同的润滑剂来进行添加░,而且░,具有着超强的控制压力。

双组份打胶机
Generally speaking, this kind of wear will have a certain impact on the motion bite. The whole movement is often a form of expression between wear and tear. In order to reduce the original wear, the following measures can be taken. For example, different materials can be selected reasonably. Compared with some metal materials, they are easier to adhere to, and the latest material phase. For plastic materials, he has a super anti-adhesion ability, they can use these different materials for surface treatment, in the actual process, they can also be treated by electric or spraying methods, in addition, they can also control the temperature of all the surface friction problems, mining. It is added with some different lubricants and has super control pressure.
如果双组份打胶机表面产生一些疲劳磨损的话░,那么在整个应变能力接触的情况之下░,往往就会有其他的一些磨损的强度░,在摩擦的表面多多少少的都会有一定的深度░,而且它有着疲劳的裂纹░,随着整个裂纹之间的相互连接░,金属微粒往往会从表面开始有所脱落░,甚至整个表面会出现一些麻点的情况░,为了提高表面的疲劳寿命░,一定要合理利用。
If some fatigue wear occurs on the surface of a two-component glue beater, then under the condition of contact of strain capacity, there will be some other wear strength. The surface of friction will have a certain depth, and it has fatigue cracks. With the interconnection of the whole cracks, metal particles will often begin to fall off from the surface. Even the whole surface will appear some pits, in order to improve the fatigue life of the surface, we must make rational use of them.
本文由双组份打胶机厂家友情奉献.更多有关的知识请点击:我们将用先进的技术•●、真诚的态度░,为您提供为全面的服务。更多有关的知识我们将会陆续向大家奉献░,敬请期待!
This article is dedicated by the two-component glue machine manufacturer. For more inion, please click: . We will use advanced technology and sincere attitude to provide you with comprehensive services. More relevant knowledge will be contributed to you one after another. Please look forward to it!

www.kecimusic.com
友情链接:四柱彩票  王牌彩票  金丰彩票  彩票8  博发彩票  必威彩票  大都会彩票  亚洲彩票  金福彩票  天鸿彩票  凤彩网彩票  美娱彩票  917彩票  百胜彩票  999彩票  1305彩票  众合彩票  大运彩票  彩票009  703彩票