The Construction Principle of Two-Component Gluing Machine
1. Because of the curing requirement of the two-component sealant, the glass coated with the two-component sealant should be moved quietly.
2. Group A and B glue should be kept clean and foreign bodies should be strictly prevented from entering the glue.
3. In the process of continuing the task, the time for each suspension of the rubber gun should not exceed 20 minutes. Otherwise, use the A-component glue to punch out the whole mixture until a single A-component glue is discharged from the muzzle of the gun.
4. High-pressure rubber hose shall not be forced to extrude or bend, so as to avoid affecting fragmentary normal tasks.
5. Mixers should always be dredged in order to ensure a good gumming effect. In case of infarction, it can be washed after soaking in acetone. It is recommended to clean every 5 groups.
6. When the glue gun is unnecessary for a long time (more than a week), the gun body should be removed and the residual colloid in the glue gun and mixer should be cleaned by solvent.
7. The amount of impurities in the rubber consumed by different two-component rubber manufacturers is different. According to the practice, it is recommended that the filter screen and check valve of component B be cleaned once for each two groups.
8. Any defects of rubber guns, pipes or parts formed by gel solidification are not covered by warranty.
9. To refuel the refuelling ports of pumps on demand, it is necessary to ensure that the oil mist is refuelled from time to time.
This article is provided by Jinan Changsheng Machinery . Want to know more about two-component glue machine. Welcome to pay attention to us, thank you!!